Download Xiaomi Mi 9 SE Flash File, Official Stock ROM, Firmware Download

If you have a Xiaomi Mi 9 SE smartphone and you are looking to download its Flash File or Firmware or Stock ROM then this tutorial is for you. Here we provide the download link for original flash file for Xiaomi Mi 9 SE. Also, we will share the complete download guide and steps to install the flash file on your smartphone in 5 easy steps. All the steps are well detailed and are this flash file will make your smartphone the way it was the day you bought it as this is the original stock ROM from Xiaomi.

Disclaimer: The following guide is easy to install, but this guide will completely wipe off the data from your smartphone and all your data will be lost including photos, music, videos, documents, and everything stored on your smartphone. So backup all the data and then only proceed with the following guide.

Here you can download the latest and original Flash File for Xiaomi Mi 9 SE Android phone. And also download the flash tool for flashing firmware of Xiaomi Mi 9 SE for free.

What is Android Flashing?

Android Flashing is a term referred to as installing Stock Android ROM on your device by completing wiping the device by removing stock firmware from the Android device and replace it with the latest version of Stock Android. The Flash File that you downloaded for Xiaomi Mi 9 SE needs to be installed/flashed on your device using the stock recovery of the device.

You can upgrade or downgrade the Android firmware with flashing as the Flash File contains a separate Firmware file that can also be flashed separately in you you are looking to flash just the firmware. Flashing Stock Android on your device will fix numbers of issues like slow device, laggy device, software issues, IMEI related issues, and improve device performance etc. But do remember, Flashing stock android using the flash file will delete all your device data and will factory reset your device and will delete all the photos, contacts, and apps, etc.

What is the Stock ROM?

A Stock ROM is an Android Operating system that is developed specifically from your Xiaomi Mi 9 SE with the firmware for your device and modem. All these files contain the Operating system of your device and you can flash this file onto your device directly using various methods that we have discussed below in the article. These Stock Android ROMis the modified version of Android OS specifically suited to run on your device.

A Stock ROM is a Flash File that contains Operating System along with system apps, A Firmware File, and a Modem file, all these files help make a connection between the software and the hardware of your device, and is important to flash the whole zip of the Flash File of the Xiaomi Mi 9 SE using the methods mentioned below.

Just make sure to follow the Pre-Requirements before beginning any step:


  • Supported device: Xiaomi Mi 9 SE (Make sure the model name matches exactly)
  • Make sure to charge your device more than 70%
  • You need a PC or Laptop running on the Windows Operating system and a USB cable to connect the device.
  • Before beginning any process make sure to take a complete backup using any method given below:
    • Full Data Backup without Root
    • Nandroid Backup via TWRP
  • Download Drivers and Tools: Qualcomm USB drivers, Xiaomi USB Drivers, Xiaomi Flash Tool.
  • Firmware Flash File File for Xiaomi Mi 9 SE

Things to Check Before Performing Android Flashing

  1. Make sure to check carefully the brand name and the exact model before downloading the Flash File otherwise you can Brick your Smart Phone.
  2. Make sure to perform this process using the original USB cable and also check the cable should not be loose at any ends, if the connection breaks in between the flashing process, it can completely brick your phone.
  3. Before trying anything Make a complete backup of your data as on installing the Flash File on the Xiaomi Mi 9 SE will wipe off all the data on the smartphone.

Quick Fixes while Flashing the Zip File

  1. In case the Android Flashing Tool hangs at setting-up connection just unplug the USB cable and reattach it, Flashing tool should now resume.
  2. Do not disconnect the cable or turn off the Smartphone once the flash has started, it will reboot automatically when the process of flashing completes.
  3. Never try to Downgrade Your Smartphone to a previous version of Android this might lead to bricking your device or wiping off the IMEI number of the device.
  4. All the methods mentioned below are working and having good success rate. Android Flashing is risky and should only be performed if you have prior experience in it or you are sure what you are doing. We are not responsible for any damage.

Download and Install Flash File for Xiaomi Mi 9 SE

Here’s a guide on how to download Xiaomi Mi 9 SE Flash File Stock firmware zip file for free. As the stock firmware (stock ROM) of any Xiaomi device is in a zip file that contains 3 different files inside it, but make sure to flash the complete zip and do not extract the zip file. The Flash zip file you will find the stock firmware of Xiaomi Mi 9 SE, Qualcomm USB driver, and Xiaomi Downloader Tool, using which you can easily flash Xiaomi Mi 9 SE. If you do not know how to flash the Xiaomi Mi 9 SE, you can flash stock ROM by following the detailed guideline given below.

The Xiaomi Mi 9 SE flash file will help you to upgrade, downgrade, or reinstall the stock firmware (OS) on your mobile device. The Flash file (ROM) also helps you repair the mobile device if it is facing any software issue, Bootloop Issue, IMEI Issue. This is the same process that the Xiaomi Service Center follows to fix any issues with your device and you can perform this at your home using the files mentioned below and the installation guide.


How to Flash Stock ROM on Xiaomi Mi 9 SE:

  1. Download Xiaomi Mi 9 SE Flash file
  2. Download QPST Flash tool, Qualcomm driver, Windows USB Drivers.
  3. Run the QPST tool and add a new port (Check device manager)
  4. Click Load XML and browse for rawprogram_Xiaomi_Mi 9 SE_unsparse.xml in the Stock ROM zip file.
  5. Click Load Patch and browse for patch0.xml in the Stock ROM file folder.
  6. Select the firmware by navigating it to the search path of the firmware file.
  7. Select Download and wait for the flashing to complete.

Flashing Xiaomi Mi 9 SE with Recovery

Flashing Android is a slightly complex process, so make sure you follow all the guidelines as they are mentioned. Make sure you have the correct files, double-check the build number and then only begin the process. You can also check the current version of Android and its build number on your Xiaomi Mi 9 SE phone by going to Settings > System).

Here are some tested methods that we have used in the past to Flash files on our Xiaomi Mi 9 SE device, make sure to choose the method in which you are comfortable in and make sure to complete all the steps mentioned.

Method 1: Flashing Stock ROM using Offical Xiaomi Recover

Before we begin the process, do remember that this process deletes all your device data. So backup all data like photos, contacts, and any other personal files, etc before flashing your phone. If you don’t understand recovery mode, please exit from it and contact the nearest customer support center.

  • Download the Firmware file from the link mentioned above and transfer the zip file to the SD Card from your desktop or laptop.
  • Then remove the SD card from the system and insert it into the Xiaomi Mi 9 SE.
  • Power off your Xiaomi Mobile, by holding the power button.
  • Hold down the Volume Up + Power Button [Volume Down + Power Button].
  • After that, Release both Buttons when you see Xiaomi LOGO appears.
  • Next, You will see the Android exclamation mark.
  • While holding down the Power button press and release Volume Up Button.
  • Navigate with Volume Buttons to select wipe data/factory reset option and then press the Power Button tp select.

  • After this, you shall use the Volume Buttons up/down to navigate to and select the option YES and press the Power button to confirm.
  • Finally, select Reboot System Now option.
  • Next, Locate the Firmware file in the main storage.



  • Now Locate the Downloaded Firmware file from Storage and Tap on the Firmware file and install it.
  • You have successfully updated your phone Firmware.

Method 2: Flashing Stock ROM on Xiaomi Mi 9 SE using ADB

In case your smartphone does not have an SD Card slot, you can use this method to directly flash the ROM to your device using a PC or a Laptop. This is the exact method that Xiaomi Service Center executives use to flash ROM on your device. For this method, you need a Computer to initiate the process, flash tool, flash file, USB drivers, a good quality USB cable to flash with this method.

Also, Remember using this method we shall flash a new stock ROM to your device and all data on your Xiaomi Mi 9 SE shall be wiped off as a new fresh version of Android will be installed on your device and all the existing data will be deleted after flashing. So make sure to backup all personal data like Videos, photos, and contacts, etc to an external drive or cloud storage to prevent data loss.

Follow these steps to flash your Xiaomi Android phone with ADB using the flash tool:

First download the Asus flash file, flash tool, and USB drivers on your PC.

  1. Then, Install the USB drivers for your Android phone.
  2. Next, launch Flash tool on your computer.
  3. Then, switch off your Xiaomi mobile.
  4. Next, press and hold
    1. Volume Up + Power Button {or}
    2. Volume Down + Power Button
  5. After that, Connect your Xiaomi phone to the computer with a USB cable.
  6. Then, browse the flash file in the flash tool and click on the download button.
  7. Now flashing start on your phone.
  8. Flashing takes 10 to 15 minutes. Please wait until flashing completed.
  9. After flashing completed, Your device automatically rebooted.
  10. Flashing done on your mobile.
  11. Finally, remove the phone from the PC.

Download Flash Tool

Here you can download the best Android Flash Tools of Xiaomi Mi 9 SE phone for free. You can flash the firmware (Stock ROM) with these flash tools.

Check out below link to download the Flash tools.

Download Xiaomi Mi 9 SE Flash File

Download Xiaomi Flash Tool

Download USB Drivers

Here you can Download and install Xiaomi Mi 9 SE mobile device USB (Universal Serial Bus) drivers for free. We have curated all the download links from the official Xiaomi website as there you can find the latest updated flash files and firmware. Check out the below link to download the USB drivers and then you can download the flash file.


The firmware shared below is officially released by the Xiaomi itself and it will help you to recover your device if in case your device is facing any issues post the installation of Flash File or Firmware or both. Some common issues are nonresponsive touch screen, boot loop, software related issue, software crashing, or laggy performance, or you might become totally dead. In this case, it’s best to visit nearby Xiaomi service center and get your device checked and get it fixed completely free.

If your device is not connecting to pc then download the driver from above and install it in your pc

Update FIRMWARE on Xiaomi Smartphone

The firmware below can only be flashed from external storage like an SD card and in case your device does not have support for SD card then you can use the second method that uses ADB to connect to your phone and can install the firmware without using the SD card.

If you don’t know how to flash or install the firmware from your sd card, after downloading the firmware from the link below scroll further down to find flashing instructions. To check the exact file name to download, check your phone’s About device section for the exact device name and download the files from the Download button given below.

Type Xiaomi Mi 9 SE (OEM Version)
File Name PD1510F_EX_A_1.19.0-Xiaomi-Mi 9
Size 1.4 GB
Build PD_Xiaomi_1510F_EX_A_1.19.0
Firmware Download


How to Exit Recovery Mode on Xiaomi Mi 9 SE

You must exit from recovery mode if you stuck at any operation or don’t understand recovery. Follow these steps to come out from recovery.

  • After you enter the Recovery Mode menu.
  • Now choose option Reboot, using the Volume buttons and press the Power button to confirm.
  • After that, Your device will be rebooted automatically.
  • You have successfully exited Recovery mode.

Note: You can also exit recovery mode by pressing the power button for a while.


General FAQ

Is it safe to flash this zip on my Xiaomi Mi 9 SE?

These two methods mentioned above are completely safe to implement and no harm can be done on your device if you follow all the steps correctly.

Can I install the firmware of other phones in my Xiaomi Mi 9 SE phone?

The firmware or Stock ROM is not the same for all Android phones. So only download and install by checking the exact model number and the file name before downloading and flashing.

Can I downgrade my Xiaomi Mi 9 SE phone to the lower Android version?

You can not downgrade to the lower version if your phone has an Android 8 or higher version. If you want to downgrade to the lower version, please go to the nearest Xiaomi service center.

It prompts “Decryption unsuccessful” while installing the firmware. What should I do?

Please don`t worry, go to Xiaomi service center near you and they will help you solve this issue.